Skip to content

Not sure of your size? Read the stamp on your bar

[email protected]

KAKEI chainsaw chain logo
20" .325" .050" 80DL Full Chisel Chain, 3-Pack

KAKEI part 3C080X

20" .325" .050" 80DL Full Chisel Chain, 3-Pack

4.5 · 15,439 ratings

Husqvarna's 450 Rancher, 545 Rancher and 550 XP with a 20-inch .325" bar need 80 drive links. That is two more than Echo's 20-inch loop, and this three-pack is cut to the Husqvarna count.

  • Bar length20"
  • Pitch.325"
  • Drive links80
  • Gauge.050"

CHAIN SPECS

$46.50partner store price at our last check

Before you open the card

  1. 1Read the stamp

    Pitch and gauge are pressed into the bar near the mounting end.

  2. 2Count the links

    Count drive links on the old loop, or read them off its card.

  3. 3Match all three

    This loop is .325" · .050" · 80DL.

Where the stamp is

About this loop

Link counts at 20 inches differ from brand to brand, even at the same pitch and gauge. For these Husqvarnas, and for Craftsman and Jonsered saws sharing the same bar, the number is 80. Count your old chain to be sure. The 550 XP is a professional saw and the 450 Rancher a landowner's saw; both benefit from the fast cut of full-chisel cutters in clean wood. This chain is not low-kickback. Part 3C080X is German steel with quenched rivets and chrome-plated cutters, and it ships in protective oil.

  • Fits the Husqvarna 450 Rancher, 545 Rancher and 550 XP plus Craftsman and Jonsered saws with this 20-inch bar.
  • Eighty drive links at .325" pitch and .050" gauge; the Echo CS-490 size carries 78.
  • Full-chisel cutters make quick work of clean firewood and felling on Rancher and XP saws.
  • Not low-kickback and sold with a kickback warning, so it belongs with experienced, trained operators.

Made for these saws

The saws named on our card for this loop. Your bar decides in the end: it must read .325", .050" and take 80 links.

Nearby on the rack

20 Inch & Longer Chains, Skip Tooth & Ripping