
Full chisel
18" .325" .063" 68DL Full Chisel Chain, 3-Pack
18".325".063"68DL
26RS 68 chain for older Stihl 025, MS250 and MS251 with .063 bars.
$38.62at our last check
Not sure of your size? Read the stamp on your bar


KAKEI part 3D066X
Full 3/8" pitch, not low profile, is what bigger gas saws spin. This 18-inch loop carries 66 drive links at .050" gauge, matches the 33RS 66 size, and uses full-chisel cutters for speed in clean timber.
CHAIN SPECS
$39.96partner store price at our last check
Pitch and gauge are pressed into the bar near the mounting end.
Count drive links on the old loop, or read them off its card.
This loop is 3/8" · .050" · 66DL.
The standard 3/8" cutter is taller and heavier than the LP version, which suits saws with more displacement and torque. Pair it with a square full-chisel corner and you get a fast, aggressive cut, at its best in clean logs and felling cuts. That speed comes with a warning: this chain is not low-kickback, so it is for experienced users only. Stihl, Echo and Homelite saws with an 18-inch 3/8" .050" bar take this loop. Our part 3D066X is German steel with quenched rivets and chrome-plated, cold-headed cutters.
The saws named on our card for this loop. Your bar decides in the end: it must read 3/8", .050" and take 66 links.

Full chisel
18".325".063"68DL
26RS 68 chain for older Stihl 025, MS250 and MS251 with .063 bars.
$38.62at our last check

Full chisel
18".325".050"68DL
For MS250 and MS251 saws on the newer thin-gauge Stihl 18-inch bar.
$38.50at our last check

Semi-chisel
18"3/8"LP.050"62DL
S62-size chain for 18-inch Poulan, Kobalt, Echo, EGO and Greenworks saws.
$28.79at our last check

Semi-chisel
18"3/8"LP.050"61DL
61-link 18-inch chain for the Stihl MS211 and MS211C.
$32.91at our last check