
Semi-chisel
18" 3/8" LP .050" 61DL Semi-Chisel Chain, 3-Pack
18"3/8"LP.050"61DL
61-link 18-inch chain for the Stihl MS211 and MS211C.
$32.91at our last check
Not sure of your size? Read the stamp on your bar


KAKEI part 1B0Q62X
Eighteen inches is a popular bar length on homeowner gas and battery saws, and the S62 is a size many of them share. Our loop has 62 drive links, 3/8" LP pitch and a .050" gauge for Poulan, Kobalt, Echo, EGO and Greenworks.
CHAIN SPECS
$28.79partner store price at our last check
Pitch and gauge are pressed into the bar near the mounting end.
Count drive links on the old loop, or read them off its card.
This loop is 3/8" LP · .050" · 62DL.
With 18 inches of bar you can take down small trees, buck trunks a 14-inch saw could not reach through, and clear serious storm damage. That work is often done in a hurry and in mud, so we kept the cutters semi-chisel: they keep working after the odd brush with the ground. Check the stamp, count 62, and it fits. Part 1B0Q62X is German steel with hardened, quenched rivets and chrome-plated cutters. The same chain comes with a bar in our 18-inch combo if your rails are worn.
The saws named on our card for this loop. Your bar decides in the end: it must read 3/8" LP, .050" and take 62 links.

Semi-chisel
18"3/8"LP.050"61DL
61-link 18-inch chain for the Stihl MS211 and MS211C.
$32.91at our last check

Full chisel
18"3/8".050"66DL
33RS 66-size full-chisel chain for 18-inch Stihl, Echo and Homelite saws.
$39.96at our last check

Full chisel
18".325".063"68DL
26RS 68 chain for older Stihl 025, MS250 and MS251 with .063 bars.
$38.62at our last check

Full chisel
18".325".050"68DL
For MS250 and MS251 saws on the newer thin-gauge Stihl 18-inch bar.
$38.50at our last check