Skip to content

Not sure of your size? Read the stamp on your bar

[email protected]

KAKEI chainsaw chain logo
4" 1/4" .043" 28DL GTA 26 Pruner Chain, 3-Pack

KAKEI part 4A4Q28X

4" 1/4" .043" 28DL GTA 26 Pruner Chain, 3-Pack

4.5 · 15,439 ratings

The GTA 26 is a hand-held pruner, and its tiny 4-inch bar wears through chains faster than most owners expect. We make this 28-link, quarter-pitch loop so you can keep three spares in the garden shed.

  • Bar length4"
  • Pitch1/4"
  • Drive links28

CHAIN SPECS

$24.99partner store price at our last check

  • German steel
  • Hardened rivets
  • Chrome cutters

Before you open the card

  1. 1Read the stamp

    Pitch and gauge are pressed into the bar near the mounting end.

  2. 2Count the links

    Count drive links on the old loop, or read them off its card.

  3. 3Match all three

    This loop is 1/4" · .043" · 28DL.

Where the stamp is

About this loop

Small bars mean every tooth passes through the wood more often, so a pruner chain dulls quickly on dusty limbs and hedge wood. Our semi-chisel cutters have rounded corners that tolerate that kind of work and still bite after contact with grit. The chain crosses to Stihl code 3670 005 0028 (71 PM3 28), the number printed in the GTA 26 manual. We cut the side plates from German steel, harden and quench the rivets, chrome the cutters, and ship every loop in anti-rust oil. KAKEI part 4A4Q28X.

  • Built for the Stihl GTA 26 mini pruner: 1/4" pitch, .043" gauge and 28 drive links on a 4-inch bar.
  • Crosses to Stihl 3670 005 0028 and 71 PM3 28, so you can match it against the number in your manual.
  • Three loops per box, so you can swap in a sharp one mid-job and file the dull ones later at the bench.
  • Tested to the low-kickback requirements of ANSI B175.1-2012, a sensible spec for close pruning with a small hand-held tool.

Made for these saws

  • Stihl GTA 26

The saws named on our card for this loop. Your bar decides in the end: it must read 1/4", .043" and take 28 links.