Skip to content

Not sure of your size? Read the stamp on your bar

[email protected]

KAKEI chainsaw chain logo
6" 1/4" .043" 37DL Pole Saw Chain, 3-Pack

KAKEI part 4A4Q37X

6" 1/4" .043" 37DL Pole Saw Chain, 3-Pack

4.5 · 15,439 ratings

A 6-inch pole saw head reaching into a canopy needs a chain with small, closely spaced teeth. Our 1/4" pitch loop packs 37 drive links onto that short bar, which keeps overhead cuts smooth and easy to steer.

  • Bar length6"
  • Pitch1/4"

CHAIN SPECS

  • German steel
  • Hardened rivets
  • Chrome cutters

Before you open the card

  1. 1Read the stamp

    Pitch and gauge are pressed into the bar near the mounting end.

  2. 2Count the links

    Count drive links on the old loop, or read them off its card.

  3. 3Match all three

    This loop is 1/4" · .043" · 37DL.

Where the stamp is

About this loop

Quarter-inch pitch puts the cutters closer together than 3/8" LP does, so the chain feeds gently and leaves a clean face on live branches, which matters when you are pruning trees you want to keep. The listing names no specific saws on purpose: pole heads come from many makers, so read your bar stamp for 1/4", .043" and 6 inches, then count 37 links before you order. We quench every rivet, chrome the semi-chisel cutters, and coat the loop in protective oil so it holds up in a damp shed between seasons. Part 4A4Q37X.

  • 1/4" pitch, .043" gauge and 37 drive links for 6-inch pole saw bars that carry the matching stamp.
  • Closely spaced semi-chisel cutters leave a tidy cut on live limbs, a plus when pruning fruit and shade trees.
  • Three chains per pack, enough to keep a sharp spare clipped to the pole through a full pruning weekend.
  • Meets ANSI B175.1-2012 low-kickback performance, which helps when the bar is working above your head.

Nearby on the rack

Pole Saw & Mini Pruner Chains