Skip to content

Not sure of your size? Read the stamp on your bar

[email protected]

KAKEI chainsaw chain logo
8" 3/8" LP .043" 34DL Pole Saw Chain, 3-Pack

KAKEI part 1B4Q34X

8" 3/8" LP .043" 34DL Pole Saw Chain, 3-Pack

4.5 · 15,439 ratings

DeWalt's 20V pole saw uses 34 drive links on its 8-inch bar, one more than most other 8-inch tools. We built this loop around that count, and it shares its specs with the DWO1DT608 replacement.

  • Drive links34
  • Gauge.043"

CHAIN SPECS

$24.98partner store price at our last check

  • German steel
  • Hardened rivets
  • Chrome cutters

Before you open the card

  1. 1Read the stamp

    Pitch and gauge are pressed into the bar near the mounting end.

  2. 2Count the links

    Count drive links on the old loop, or read them off its card.

  3. 3Match all three

    This loop is 3/8" LP · .043" · 34DL.

Where the stamp is

About this loop

That single extra link is why generic 8-inch chains often end up too tight to mount on a DCPS620 or DCCS623B. Our 1B4Q34X loop matches the DeWalt, the Craftsman CMCCSP20 and model 79240, with 3/8" LP pitch and a .043" gauge for the narrow cordless bar. On a pole you want teeth that keep cutting when a branch drags bark and grit into the kerf, and that is what semi-chisel profiles do well. Every chain starts as German steel, gets hardened rivets and chrome-plated cutters, and leaves us coated in anti-rust oil.

  • Fits the DeWalt 20V DCPS620 and DCCS623B, Craftsman CMCCSP20 and 79240 pole and compact saws with 8-inch bars.
  • Cross-references DeWalt DWO1DT608 and the R34 code, so you can compare it against the chain you are replacing.
  • Thirty-four drive links; do not substitute a 33-link 8-inch chain, which will not reach around this bar.
  • Low-profile semi-chisel design meets ANSI B175.1-2012 kickback requirements for steadier overhead limbing.

Made for these saws

  • DeWalt 20V DCPS620
  • DeWalt DCCS623B
  • Craftsman CMCCSP20
  • 79240

The saws named on our card for this loop. Your bar decides in the end: it must read 3/8" LP, .043" and take 34 links.

Nearby on the rack