Skip to content

Not sure of your size? Read the stamp on your bar

[email protected]

KAKEI chainsaw chain logo

Before you open the card

  1. 1Read the stamp

    Pitch and gauge are pressed into the bar near the mounting end.

  2. 2Count the links

    Count drive links on the old loop, or read them off its card.

  3. 3Match all three

    This loop is .325" · .058" · 86DL.

Where the stamp is

About this loop

At 22 inches, this is the longest .325" chain we sell, and the heavier .058" gauge is uncommon at that pitch. That combination is why owners often struggle to find replacements. Measure twice: read the bar stamp for .325" and .058", then count 86 links. A full-chisel cutter gives the 57cc engine a fast cut in clean firewood and small felling jobs. It is not low-kickback, and a 22-inch bar gives the nose plenty of reach, so work carefully. Part 2C886X uses German steel, hardened rivets and oiled, chrome-plated cutters.

  • Fits the Blue Max 20160 57cc chainsaw and its 22-inch .325" pitch, .058" gauge bar.
  • Eighty-six drive links, the longest .325" chain in our range, so count carefully before fitting.
  • Square full-chisel corners suit clean, seasoned firewood and small felling jobs on a 57cc powerhead.
  • Not low-kickback; with a long bar nose, it calls for an experienced operator and careful technique.

Made for these saws

  • Blue Max 20160 57cc

The saws named on our card for this loop. Your bar decides in the end: it must read .325", .058" and take 86 links.

Nearby on the rack

20 Inch & Longer Chains, Skip Tooth & Ripping