Full chisel skip tooth
20" 3/8" .050" 72DL Skip-Tooth Full Chisel Chain, 3-Pack
20"3/8".050"72DL
Skip-tooth 20-inch chain for Husqvarna 455 and 460 Rancher and Stihl MS391.
$43.39at our last check
KAKEI part 2D872X
20" 3/8" .058" 72DL Full Chisel Chain, 3-Pack
4.5 · 691 ratingsHusqvarna's professional saws, from the 555 and 562XP to the 372XP, 572XP and 3120XP, often run a .058" gauge bar. This 20-inch, 72-link full-chisel loop is made for that heavier groove.
- Bar length20"
- Pitch3/8"
- Drive links72
- Gauge.058"
CHAIN SPECS
$42.99partner store price at our last check
- German steel
- Hardened rivets
- Chrome cutters
Before you open the card
- 1Read the stamp
Pitch and gauge are pressed into the bar near the mounting end.
- 2Count the links
Count drive links on the old loop, or read them off its card.
- 3Match all three
This loop is 3/8" · .058" · 72DL.
About this loop
The .058" gauge sits between the common .050" and the .063" used by Stihl, and it is common across Husqvarna's professional line. Put a .050" chain in a .058" bar and it will wander in the cut; put a .058" chain in a .050" bar and it will not go in at all. So read the stamp first. For loggers and firewood cutters running these saws all day, a square full-chisel corner means speed in clean wood. It is not low-kickback. Our part 2D872X uses German steel, hardened and quenched rivets, and chrome-plated cutters.
- Fits Husqvarna 555, 562XP, 365, 565, 372XP, 572XP, 576XP, 390XP, 395XP and 3120XP with 20-inch bars.
- Heavier .058" drive links for the wider bar groove found on many Husqvarna professional saws.
- Seventy-two drive links at 3/8" pitch; confirm both numbers on the bar stamp before fitting.
- Not low-kickback; these professional saws and this fast chain are best left to experienced sawyers.
Made for these saws
- Husqvarna 555
- Husqvarna 562XP
- Husqvarna 365
- Husqvarna 565
- Husqvarna 372XP
- Husqvarna 572XP
- Husqvarna 576XP
- Husqvarna 390XP
- Husqvarna 395XP
- Husqvarna 3120XP
The saws named on our card for this loop. Your bar decides in the end: it must read 3/8", .058" and take 72 links.
Nearby on the rack
20 Inch & Longer Chains, Skip Tooth & Ripping
Full chisel
20" 3/8" .050" 72DL Full Chisel Chain, 3-Pack
20"3/8".050"72DL
33RS 72 full-chisel chain for Husqvarna Rancher and Stihl MS311, MS391 bars.
$42.97at our last check
Full chisel
20" 3/8" .050" 70DL Full Chisel Chain, 3-Pack
20"3/8".050"70DL
72LPX70CQ-size chain for the Echo CS-590 Timber Wolf and CS-4400.
$42.60at our last check
Full chisel
20" .325" .058" 76DL Full Chisel Chain, 3-Pack
20".325".058"76DL
For 62cc VEVOR, Supmix, NEOTEC, WEMARS and Blue Max 20-inch saws.
$43.99at our last check