Skip to content

Not sure of your size? Read the stamp on your bar

18" .325" .050" 72DL Semi-Chisel Chain, 3-Pack

KAKEI part 1C0Q72X

18" .325" .050" 72DL Semi-Chisel Chain, 3-Pack

4.5 · 15,439 ratings

The H72 is the 18-inch .325" chain behind a lot of mid-size Husqvarna, Echo and Jonsered saws. We make it in semi-chisel form with 72 drive links and a .050" gauge.

  • Bar length18"
  • Pitch.325"
  • Drive links72

CHAIN SPECS

$38.97partner store price at our last check

  • German steel
  • Hardened rivets
  • Chrome cutters

Before you open the card

  1. 1Read the stamp

    Pitch and gauge are pressed into the bar near the mounting end.

  2. 2Count the links

    Count drive links on the old loop, or read them off its card.

  3. 3Match all three

    This loop is .325" · .050" · 72DL.

Where the stamp is

About this loop

Mid-size gas saws like the Husqvarna 440 have enough power for an 18-inch bar and stay light enough to carry all day. The .325" pitch fits that class, and semi-chisel cutters mean the chain keeps working through bark and sand far better than a square chisel. It also meets ANSI B175.1-2012 low-kickback requirements, which is not a given at this size. Our part 1C0Q72X matches Husqvarna 591094872 and the 20LPX072G code, with German steel plates, hardened rivets and chrome-plated cutters that ship in anti-rust oil.

  • Fits the Husqvarna 440, Echo CS-400 and Jonsered saws with an 18-inch .325" pitch, .050" gauge bar.
  • Cross-referenced to Husqvarna 591094872, 20LPX072G and the H72 code, all with 72 drive links.
  • Semi-chisel cutters stay sharp longer than full chisel in sandy or barky wood and file easily.
  • Low-kickback per ANSI B175.1-2012, a helpful spec for landowners who cut a few cords a year.

Made for these saws

  • Husqvarna 440
  • Echo CS-400
  • Jonsered

The saws named on our card for this loop. Your bar decides in the end: it must read .325", .050" and take 72 links.