Skip to content

Not sure of your size? Read the stamp on your bar

[email protected]

KAKEI chainsaw chain logo
10" 3/8" LP .050" 39DL Pole Saw Chain, 3-Pack

KAKEI part 1B0Q39X

10" 3/8" LP .050" 39DL Pole Saw Chain, 3-Pack

4.5 · 15,439 ratings

This 10-inch, 39-link, .050" loop is the 91VXL39CQ size used on Echo's PPF and PPT pole pruners and the PAS230 attachment. It also fits the McCulloch 10E, 12E and 14E and the Poulan PLN1510.

  • Bar length10"
  • Pitch3/8"LP
  • Drive links39
  • Gauge.050"

CHAIN SPECS

$24.97partner store price at our last check

  • German steel
  • Hardened rivets
  • Chrome cutters

Before you open the card

  1. 1Read the stamp

    Pitch and gauge are pressed into the bar near the mounting end.

  2. 2Count the links

    Count drive links on the old loop, or read them off its card.

  3. 3Match all three

    This loop is 3/8" LP · .050" · 39DL.

About this loop

Echo power pruners are working tools on farms and landscape crews, and they eat chains when limbs come down full of grit. The 39-link count is one shorter than the 40-link loops found on many 10-inch cordless saws, so check before you mix them in a toolbox. We give this chain semi-chisel cutters, which stay useful longer in dirty wood than a sharper square corner would. The side plates are German steel, the rivets are hardened, and the cutters are chrome-plated and ground on rotary machines. KAKEI part 1B0Q39X.

  • Fits Echo PPF210, PPF211, PPT230, PAS230 and PPT266, McCulloch 10E, 12E and 14E, and Poulan PLN1510.
  • Same size as the 91VXL39CQ code: 3/8" LP pitch, .050" gauge and 39 drive links on a 10-inch bar.
  • Thirty-nine links, not forty; the 10-inch cordless loops we make for Ryobi and Worx are one link longer.
  • Low-kickback semi-chisel cutters meet ANSI B175.1-2012, a good match for pole work above a crew on the ground.

Made for these saws

  • Echo PPF210
  • Echo PPF211
  • Echo PPT230
  • Echo PAS230
  • Echo PPT266
  • McCulloch 10E
  • McCulloch 12E
  • Poulan PLN1510

The saws named on our card for this loop. Your bar decides in the end: it must read 3/8" LP, .050" and take 39 links.