Skip to content

Not sure of your size? Read the stamp on your bar

[email protected]

KAKEI chainsaw chain logo
18" Bar and Chain Combo, 3/8" LP .050" 62DL, 3 Chains + 1 Bar

Guide bar + 3 chains

18" Bar and Chain Combo, 3/8" LP .050" 62DL, 3 Chains + 1 Bar

4.6 · 686 ratings

Replacing a tired 18-inch bar, or fitting one for the first time? This combo pairs our lightweight guide bar with three 62-link semi-chisel chains for Poulan, Kobalt, Echo, EGO and Greenworks saws.

  • Bar length18"
  • Pitch3/8"LP
  • Drive links62
  • Gauge.050"

BAR + CHAIN SPECS

$45.90partner store price at our last check

  • German steel
  • Hardened rivets
  • Chrome cutters

Before you open the card

  1. 1Read the stamp

    Pitch and gauge are pressed into the bar near the mounting end.

  2. 2Count the links

    Count drive links on the old loop, or read them off its card.

  3. 3Match all three

    This loop is 3/8" LP · .050" · 62DL.

Where the stamp is

About this loop

An 18-inch bar gives you the reach to buck bigger trunks and fell small trees, but only if your saw is rated for that length, so check your manual first. From there the kit is simple: one bar with a 3/8" LP, .050" groove, and three chains that match it at 62 drive links. The bar is designed for less kickback and stays light at the end of the saw, and the chains meet ANSI B175.1-2012 low-kickback performance. They share the German steel, quenched rivets and chrome-plated cutters of our standalone S62 loop.

  • In the box: a lightweight 18-inch bar and three matching 62-link semi-chisel chains at .050" gauge.
  • Fits 18-inch Poulan, Kobalt, Echo, EGO and Greenworks saws; confirm your saw supports this bar length.
  • Longer reach for bucking wider trunks, with a light bar that keeps the saw balanced in your hands.
  • Chains meet ANSI B175.1-2012 low-kickback performance and match our standalone S62-size loop.

Made for these saws

  • Poulan
  • Echo
  • EGO
  • Greenworks

The saws named on our card for this combo. The new bar brings its own groove and nose, so what matters now is that your saw mounts 18-inch bars and a 3/8" LP drive sprocket.

Nearby on the rack

Guide Bar Combos & Sharpening Kit