Skip to content

Not sure of your size? Read the stamp on your bar

[email protected]

KAKEI chainsaw chain logo
16" .325" .063" 67DL Micro-Chisel Chain, 3-Pack

KAKEI part 1C3Q67X

16" .325" .063" 67DL Micro-Chisel Chain, 3-Pack

4.5 · 691 ratings

Heavy .063" drive links are what the older Stihl 026, 028 and 029, and the MS261, ride on with a 16-inch bar. This 67-link loop matches Stihl 26RM3 67 and uses forgiving micro-chisel cutters.

  • Bar length16"
  • Pitch.325"
  • Drive links67
  • Gauge.063"

CHAIN SPECS

$35.63partner store price at our last check

  • German steel
  • Hardened rivets
  • Chrome cutters

Before you open the card

  1. 1Read the stamp

    Pitch and gauge are pressed into the bar near the mounting end.

  2. 2Count the links

    Count drive links on the old loop, or read them off its card.

  3. 3Match all three

    This loop is .325" · .063" · 67DL.

Where the stamp is

About this loop

The .063" gauge is the heaviest drive link we make for .325" pitch, and many Stihl mid-size saws were built around it. A thinner chain in that wide groove will lean and cut crooked. Our micro-chisel cutters have a rounded working corner, so they hold up in dirty wood far better than a square chisel and still file easily. This is also a low-kickback chain, tested to ANSI B175.1-2012, which suits landowners who cut occasionally. KAKEI part 1C3Q67X matches the 36890050067 and L67 codes and ships three to a box.

  • Fits the Stihl 026, 028, 029 and MS261 with a 16-inch .063" gauge bar and 67 drive links.
  • Cross-references Stihl 26RM3 67 and 36890050067, plus the L67 code found on older boxes.
  • Micro-chisel cutters with rounded corners stay sharp in dirty wood and meet ANSI B175.1-2012 low-kickback limits.
  • The wide .063" groove needs a matching chain; a .050" loop would lean and pull the cut sideways.

Made for these saws

  • Stihl 026
  • Stihl 028
  • Stihl 029
  • Stihl MS261

The saws named on our card for this loop. Your bar decides in the end: it must read .325", .063" and take 67 links.

Note: 2022 and newer Stihl MS 271 may have a .050 gauge bar
Stihl changed several .325" saws from .063" to .050" gauge around 2023. Check the stamp: this loop is .063".

Nearby on the rack

14 & 16 Inch Chainsaw Chains