Skip to content

Not sure of your size? Read the stamp on your bar

[email protected]

KAKEI chainsaw chain logo
14" 3/8" LP .050" 50DL Semi-Chisel Chain, 3-Pack

KAKEI part 1B0Q50X

14" 3/8" LP .050" 50DL Semi-Chisel Chain, 3-Pack

4.5 · 691 ratings

Here is the .050" twin of our 14-inch Stihl chain. It matches Stihl 63PM3 50 for MS192T, MS193T and MS194T saws running the wider bar, and it also fits Remington and McCulloch 14-inch models.

$25.05partner store price at our last check

  • German steel
  • Hardened rivets
  • Chrome cutters

Before you open the card

  1. 1Read the stamp

    Pitch and gauge are pressed into the bar near the mounting end.

  2. 2Count the links

    Count drive links on the old loop, or read them off its card.

  3. 3Match all three

    This loop is 3/8" LP · .050" · 50DL.

Where the stamp is

About this loop

Stihl top-handle saws are popular for tree work and orchard pruning because they are light and compact. They have come with both gauges, and a .050" bar needs a .050" chain to track true. Read the stamp, confirm 50 drive links, and you are set. Our semi-chisel cutters give up a little raw speed compared with a square chisel but stay sharp much longer when limbs are dusty or mossy. The loop is German steel with quenched rivets, and the cutters are chrome-plated, cold-headed and ground. KAKEI part 1B0Q50X, equal to 36130050050 and S50.

  • Fits Stihl MS192T, MS193T and MS194T plus Remington and McCulloch saws with a 14-inch .050" gauge bar.
  • Cross-references Stihl 63PM3 50 and 36130050050 and the S50 code, all 3/8" LP with 50 drive links.
  • Check your gauge first: the same Stihl saws also run .043" bars, which take our 61PMM3 50 loop.
  • Semi-chisel cutters keep their edge in mossy or dusty limbs and meet ANSI B175.1-2012 low-kickback performance.

Made for these saws

  • Stihl MS194T
  • Stihl MS193T
  • Stihl MS192T
  • Remington
  • McCulloch

The saws named on our card for this loop. Your bar decides in the end: it must read 3/8" LP, .050" and take 50 links.