Skip to content

Not sure of your size? Read the stamp on your bar

[email protected]

KAKEI chainsaw chain logo
14" 3/8" LP .043" 50DL Semi-Chisel Chain, 3-Pack

KAKEI part 1B4Q50X

14" 3/8" LP .043" 50DL Semi-Chisel Chain, 3-Pack

4.5 · 15,439 ratings

Stihl's small saws, from the MS170 to the MS194T top-handle, have shipped with both .043" and .050" bars over the years. This three-pack is the thinner .043" version, sized to Stihl 61PMM3 50.

  • Bar length14"
  • Drive links50
  • Gauge.043"

CHAIN SPECS

$26.95partner store price at our last check

  • German steel
  • Hardened rivets
  • Chrome cutters

Before you open the card

  1. 1Read the stamp

    Pitch and gauge are pressed into the bar near the mounting end.

  2. 2Count the links

    Count drive links on the old loop, or read them off its card.

  3. 3Match all three

    This loop is 3/8" LP · .043" · 50DL.

Where the stamp is

About this loop

Before you order, pull the bar and read the stamp. If it says .043", this is your chain; if it says .050", pick our 63PM3 50 loop instead. Both carry 50 drive links at 14 inches, which is exactly why they get mixed up. The MS170 and MS180C are familiar homeowner saws, used for firewood rounds, fence repairs and storm limbs, and the top-handles see a lot of pruning. We give them a semi-chisel chain with hardened rivets, chrome-plated cutters and German steel plates. KAKEI part 1B4Q50X, cross-referenced to 36100050050 and R50.

  • Fits the Stihl MS170, MS180C, MS193T and MS194T with a .043" gauge 14-inch bar and 50 drive links.
  • Cross-references Stihl 61PMM3 50 and 36100050050, plus the R50 code, so you can compare it with your old chain box.
  • Stihl bars in this size come in both .043" and .050", so confirm the gauge on your bar stamp first.
  • Semi-chisel teeth meeting ANSI B175.1-2012 low-kickback rules, well suited to light pruning and firewood work.

Made for these saws

  • Stihl MS170
  • Stihl MS180C
  • Stihl MS193T
  • Stihl MS194T

The saws named on our card for this loop. Your bar decides in the end: it must read 3/8" LP, .043" and take 50 links.

Nearby on the rack

14 & 16 Inch Chainsaw Chains