Skip to content

Not sure of your size? Read the stamp on your bar

[email protected]

KAKEI chainsaw chain logo
14" 3/8" LP .043" 52DL Semi-Chisel Chain, 3-Pack

KAKEI part 1B4Q52X

14" 3/8" LP .043" 52DL Semi-Chisel Chain, 3-Pack

4.5 · 15,439 ratings

Fourteen-inch battery saws such as the EGO CS1400 and CS1401, Makita XCU03 and Worx WG384 run a 52-link, .043" chain. We make it in semi-chisel form, three to a pack, cross-referenced to 49162749 and R52.

  • Bar length14"
  • Pitch3/8"LP
  • Drive links52
  • Gauge.043"

CHAIN SPECS

$27.43partner store price at our last check

  • German steel
  • Hardened rivets
  • Chrome cutters

Before you open the card

  1. 1Read the stamp

    Pitch and gauge are pressed into the bar near the mounting end.

  2. 2Count the links

    Count drive links on the old loop, or read them off its card.

  3. 3Match all three

    This loop is 3/8" LP · .043" · 52DL.

Where the stamp is

About this loop

A 14-inch cordless saw is where many homeowners land for firewood and cleanup, and the thin .043" gauge is part of why those saws cut efficiently on battery power. One caution from our support desk: of the 2727-20 and the 2826-20T, only the 2727-20 takes this loop. The 2826-20T needs our .325" LP chain with 59 drive links. For the EGO, Makita, Worx, Kobalt and Ryobi saws listed, count 52 links and you are done. KAKEI part 1B4Q52X is German steel with hardened rivets and chrome-plated cutters.

  • Fits the EGO CS1400 and CS1401, Makita XCU03, Worx WG384 and 14-inch Kobalt and Ryobi cordless chainsaws.
  • Works on the 2727-20 but not the 2826-20T, which takes our 14-inch .325" LP chain with 59 links.
  • Thin .043" gauge and low-profile cutters remove less wood per pass, helping stretch the runtime of each battery.
  • Cross-referenced to 49162749 and R52; semi-chisel and tested to ANSI B175.1-2012 low-kickback requirements.

Made for these saws

  • EGO CS1400
  • EGO CS1401
  • Makita XCU03
  • Worx WG384
  • Kobalt
  • Ryobi

The saws named on our card for this loop. Your bar decides in the end: it must read 3/8" LP, .043" and take 52 links.

Nearby on the rack

14 & 16 Inch Chainsaw Chains